Pool Points
Posted on Monday, June 2, 2008 in Pool Cues
Pool Points
Look at this page if you are ssearching for Pool Points
 |
 Players G 2285 White Black Crown Points Pool Billiards Cue Stick FREE CASE  US $71.99
|
 Viking Pool Cue Green Speckeled Wrap 3 point with Mother of Pearl Used US $175.99 |
 McDermott Star S30 Maple Points Turquoise Diamonds Pool Billiard Cue Stick CASE US $169.00
|
 Older 4 point inlay pool cue no name strait US $49.99
|
 Vintage LISHAN 4 point all inlay pool cue butt strait US $59.99
|
 High End Custom Pool Cue 16 Points Ret$1500 US $26.00
|
 4 point PALMER CUE 100 ALL INLAY Pool Cue Stick 4139 US $59.00
|
 6 point PALMER CUE 100 ALL INLAY Pool Cue Stick 4043 US $79.00
|
 VINCE DE CARLO GENUINE 6 POINTS CUE pool billiards A08 US $19.99
|
 VINCE DE CARLO GENUINE 6 POINTS CUE pool billiards 037 US $19.99
|
 Beautiful 12 point pool cue billiards floating points must see US $300.00
|
 Southwest pool cue 402 02 6 points Birdseye Maple Purple Heart US $2,500.00
|
 BEAUTIFUL 6 Point Fury Pool Cue 19 oz and Hard 1 1 Case Included Gently Used US $74.99
|
 Competition pool cue 4 pointsstrait No dings or dents or scrapes US $49.99
|
 4 point PALMER CUE 100 ALL INLAY Pool Cue Stick 4017 US $99.00
|
 4 point PALMER CUE 100 ALL INLAY Pool Cue Stick 4132 US $59.00
|
 4 Point Ebony Birdseye PEARL Inlay 2 Shafts Custom Billiard Pool Cue StickZ5 US $99.00
|
 Ariel Carmellie four point Sneaky Point pool cue butt only 3x8x10 pin US $350.00
|
 Minnesota FatsCompass Point Pool Cue Billiard Stick 19oz MFR6060 US $24.95
|
 Older inlay 4 point pool cue no name on itStrait US $49.99
|
 Minnesota Fats Compass Point Pool Cue Billiard Stick 20oz No Reserve US $6.50
|
 Pre owned Meucci pool cue Finished over black wrap section 4 points US $197.50
|
 Pre owned unknown Sneaky Pete pool cue Wrap less 4 point full splice US $12.50
|
 Unknown 4 point full splice pool cue US $17.50
|
 8 point PALMER CUE 100 ALL INLAY Pool Cue Stick 4067 US $89.00
|
 6 point PALMER CUE 100 ALL INLAY Pool Cue Stick 4142 US $69.00
|
 VINCE DE CARLO GENUINE 6 POINTS CUE pool billiards 0040 US $19.99
|
 BUSHKA 4 POINT INLAY CUE pool billiards CARLSCUES EBAY 064 US $39.99
|
 SOLID EBONY Handmade KC Custom Pool Cue 12 POINTS $1500 US $1,500.00
|
 LUCASI POOL CUE L E29 4 POINT BALABUSHKA DESIGN LIFETIME GUARANTEE MSRP $35499 US $277.00
|
 Y Core Shaft 4 Point African COCOBOLO Custom Pool Cue StickJ5 US $62.10
|
 Y Core Shaft 4 Points Indian ROSEWOOD Custom Pool Cue StickJ6 US $62.10
|
 Players Pool Billiard Cue C 803 Gray Points FREE CASE US $44.79
|
 Doctor Cheng New Southwest Style 6 Points Billiards Pool Cue Stick LG 1B012 US $160.00
|
 Doctor Cheng New Southwest Style 6 Points Billiards Pool Cue Stick LG 1B011 US $160.00
|
 ROSEWOOD KC Custom Pool Cue SPLICE 6 Points Ret$495 US $495.00
|
 McDermott Lucky L17 Maple Pink Sword Points Diamonds Pool Billiard Cue Stick US $59.00
|
 JJ Sneaky Pete w 4 Wood Points Break Pool Cue New US $39.99
|
 NEW ENERGY by Players Pool Cue HC04 HC 04 Banded Points Antique Stain US $71.99
|
 custom made 8 point pool cue US $900.00
|
How do you change a beaded pool liner for an above ground swimming pool?
Installing a beaded liner for an above ground swimming pool is very easy. There are a few simple guidelines that will help steer you away from trouble spots.
- Install a Beaded liner on a sunny day. Preferably on a day that is 75 degrees or warmer.
- Prepare the pool before installing the new liner by draining all of the water out of the pool. Then remove the old liner.
- Re groom the bottom of the pool with fresh bank sand (also called pool sand). Do not use “torpedo sand.”
- Measure the pool one last time to make sure you ordered the correct size liner before opening the box. Opened boxes are usually not returnable.
- If the size / measurement is correct, unroll the liner out in your yard and let the warm sun hit the liner for at least 30 minutes.
Now you are ready to install the liner. Remember, having a few helping hands is good advice.
- Lay the liner out flat in the pool.
- Center the seam of the liner with respect to the bottom perimeter of the pool. (If the seam of the liner does not fit exactly to the edge of the perimeter of the pool, it is OK.) The goal is to center the liner with respect to the pool, even though the liner seems to come up short.
- Push out some of the bigger wrinkles on the floor of the liner. It does not have to be perfect yet……the goal is to have the bottom of the liner centered and laying flat with no big wrinkles.
- Go to the North corner of the pool and slip the beaded edge of the liner into the grooved edge of the bead track that sits on top of the pool wall. Then go to the South corner and do the same. Finally go to the East and West and repeat.
- At this point the liner will be attached to the Bead Receiver (bead track) in 4 spots. Now you should attach the liner at the NW, then SW, then NE, and SE corners. The purpose of this technique is to distribute the stretch evenly.
- Lastly, attach the liner into the groove at the remaining open spots. If it is a tight fit, this is OK……just lean into the liner with the weight of your body from the inside of the pool, to stretch the top of the liner towards the grooved edge of the bead track.
- When the liner is completely attached, smooth out the wrinkles at the bottom of the pool liner.
- Do not fill the pool with water until you have the liner where you want it. Once you start filling the pool with water you are past the point of no return. At this point it is OK for the liner to be taught (or tight) in the corners.
- Next, start filling the pool with water. As the puddle of water grows, push the wrinkles out of the liner towards the pool wall. You should remain in the pool until the pool is 3” full of water. While it is filling you should continue to stretch the liner by hand towards the pool wall. The goal is to alleviate or lessen the tightness in the corners.
- When the pool reaches 3” full of water you can get out of the pool. Any tightness in the corners will be stretched by the weight of the water.
- Make sure that you continue to fill the pool in hot and sunny (daylight) hours. Check the pool every 20 minutes until the pool is 2ft. full of water. The purpose of this is to combat the common problem or issue: when or if the beaded lip pulls out of the bead track. If it does you can put it back in and continue to fill.
- Do not fill the pool if the sun is not out, or if you are not checking the process every 20 minutes.
- When the water reaches the 2ft. point, you then cut the holes for the skimmer and the return.
Installing a beaded liner can be easy when the guidelines are followed correctly, but it is always recommended that experienced professionals install pool liners to prevent over stretching and thinning the vinyl material, which can void the manufacturers warranty and make the liner more susceptible to wear and tear.
About the Author
David Phelps, owner of LinerWorld, has facilitated a swimming pool products company for the last 20 years, with his specialty being above ground swimming pools. He received his certification from the National Spa & Pool Institute for Tech 1, and has used this certification to improve the sales and services of his company. David has sold products and serviced tens of thousands of swimming pools across the USA.
Comments are closed for this entry.