Real Leather Cue
Real Leather Cue
Look at this page if you are ssearching for Real Leather Cue
 |
 Doctor Cheng New Crusade Real Leather Billiards Pool Cue Case 2x4 3  US $115.00
|
 Sterling Black and Wine 3x5 Real Leather Pool Cue Case Free Shipping US $175.00
|
 PERADON REAL LEATHER DIAMOND 3 4 SNOOKER CUE CASE US $282.87
|
In Praise of Snooker Tables
Snooker is one of the great games, relaxing, requiring some skill but not too strenuous. Having a snooker room in your home is something to aspire to, at least for men. However you do need a large room for the 12-foot full-blown version. The good news is you can get smaller tables too, starting at 7 foot. They still have the same slate bed and leather pockets so they last forever and still have that classic wood frame. The 7 foot and 8 foot versions only have 10 reds on the table so the table doesn't get overcrowded with balls, but apart from that its almost as good as the real thing.
If you are thinking of buying a snooker table, first check the room size required. As a general rule of thumb, add 10 feet to each dimension to find out what room size you need. The 12-foot table for example requires a room size of 22 feet by 16 feet to allow for a clean cue action all around the table. The cues are normally 57 inches in length. So for a 7-foot table you need a room of 17 feet by 10 foot 6 inches. (A snooker table is always twice as long as it is wide)
When it comes to which one to buy, bear in mind that the actual playing surface is virtually the same on all snooker tables. The price you pay for a table is largely determined by the leg design and wood chosen. The tables can be made either in solid wood like mahogany or ash or made from boxwood covered in a veneer. The tables made from the solid wood are stained to give it the colour you want whilst the veneered type have the correct colour of veneer applied and are less expensive. Also the leg design is also a factor in the cost. A complicated design is more difficult to make and so more expensive.
The larger tables have 8 legs and the smaller tables have 4 legs and the medium size tables have 6 legs. The weight of a big 12-foot table is almost 1 ton and generally the weight of a snooker table is the equivalent weight of 2 men per leg. So a 4-leg table is half a ton up to the full ton for an 8 leg table.
Most of the weight of a snooker table is in the slate of course. The thickness of the slate is usually 1 inch up to 1-¾ inches for the tournament tables. The smaller tables usually have a single piece of slate for tables up to 8 feet. That requires 3 men at least to lift it, so for the bigger tables the slate is cut into separate pieces and then aligned when it is assembled on site. This is why snooker tables should be professionally installed.
When the snooker table is put together, the frame is assembled first and that has large wooden cross members to put the slate on. The slate is the put onto the frame and if the slate is in separate pieces they are aligned to provide a perfectly flat surface so the gap between the individual pieces is virtually non-existent. The cloth is then stretched over the slate and stapled to the frame to keep the cloth taught. The cushions which already have the rubber and cloth prepared, are then bolted to the frame. The pockets are made from metal and leather are screwed into the side rails last of all.
So if you are thinking of buying a snooker table, first determine what size table will fit in your room and then decide what colour wood would be best in your room from light coloured ash to the dark mahogany. The weight of the table is spread between lots of legs and a standard floor type is usually quite sufficient. Then think of what it would be like to have your own snooker table, the look and feel of it, and enjoy.
About the Author
Authored by a keen fan of snooker, Steve Porter For more info goto Snooker tables
Comments are closed for this entry.